Milescraft 1318 DrillMate Portable Drill Guide – Multi-Angle Drill Guide Attachment – Compatible with most 3/8 in. Drill Accessories – Self-Centering Drill Guide Base – Multi-Angle Readouts

Milescraft 1318 DrillMate Portable Drill Guide - Multi-Angle Drill Guide Attachment - Compatible with most 3/8 in. Drill Accessories - Self-Centering Drill Guide Base - Multi-Angle Readouts

    Features:

  • Perfect for straight or angled drilling, drilling on the edge of a board or on round stock
  • Attaches to all 3/8″ And 1/2″ Power drills and it also includes a 3/8″ Capacity chuck with key
  • Angle cuts of 45 Degree to 90 degrees, with a built in angle read out in the all metal base
  • Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter
  • Adjustable depth stop and spring action control of the head

The Original Cabinet Hardware Jig – Adjustable Template for Fast and Accurate Installation of Door and Drawer Front Knobs, Pulls and Handles – Professional Drill Guide – True Position Tools – TP-1934

The Original Cabinet Hardware Jig - Adjustable Template for Fast and Accurate Installation of Door and Drawer Front Knobs, Pulls and Handles - Professional Drill Guide - True Position Tools - TP-1934

    Features:

  • THE ORIGINAL CABINET HARDWARE JIG – Accurately Install handles or knobs on virtually any cabinet door and drawer front. Eliminate tedious hand measuring or homemade templates and quickly install your cabinet pulls and knobs. Designed for professionals and DIY’ers alike to make your hardware installation fast, easy, and worry free.
  • PRECISION YOU NEED – 10x more precise than imitations, with proven results you can count on. Patent pending True Calibration system with Perfect Match laser engraved rulers. The most accurate cabinet hardware jig on the market.
  • FAST AND EASY TO USE – Simply tighten thumb screws in desired location on the jig, hold in place, and drill. Robust design does not require marking or clamps. Take the stress out of adding hardware to your cabinets with our fully adjustable and reversible drill template. Even install shelf pin holes and hinge plates with our versatile design.
  • AVOID COSTLY MISTAKES – Cabinets are an investment that need to be protected. This is why we use only the highest quality materials and proprietary machining, then hand calibrate every jig so that your knobs or pulls are placed exactly where you want them. While counterfeit jigs may look the same, they cannot mimic our extreme accuracy.
  • LIFETIME WARRANTY – Family-owned & operated for 25 years, we build tools that stand up to the daily use of a professional and maintain the precision needed to ensure the job is done right. We offer a lifetime bushing warranty and free replacement for 60 days if the jig is not absolutely perfect. Proudly made in the USA

JessEm 02310 Rout-R-Lift II Router Lift and 02030 10-Piece Insert Ring Kit with Caddy Bundle (2 Items)

JessEm 02310 Rout-R-Lift II Router Lift and 02030 10-Piece Insert Ring Kit with Caddy Bundle (2 Items)

    Features:

  • Bundle Includes: JessEm Rout-R-Lift II Router Lift for Porter Cable, Dewalt and Bosch Routers with 3.5″ Diameter Motors and JessEm 10-Piece Insert Ring Set with Caddy for Router Plates and Lift Systems
  • Compatibility: This model is designed for use with Porter Cable 690/890, DW 610/616/618, Bosch 1617/1618, or any other routers with 3.5″ diameter motors
  • Double-Sealed Ball Bearing: Thanks to the a double sealed bearing to the spindle, the Rout-R-Lift II can smoothly raise and lower your motor with ease
  • Lift Shafts: The shafts are attached to the top plate and fasten in place with more than one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations
  • Sturdy Construction: All the machined components on the Rout-R-Lift II are CNC machined for durability

Hougen HMD904S 115-Volt Swivel Base Magnetic Drill

Hougen HMD904S 115-Volt Swivel Base Magnetic Drill

    Features:

  • Large 1-1/2″ x 2″ capacity, The Drill of Choice for Fabrication
  • Lightweight, Powerful and Versatile, Hidden motor cord , Ergonomic housing
  • Increased Safety with Less Maintenance, Lower Overall Height, Lift Detector Safety System
  • LED Pilot Light for Low Light Conditions and Greater Hole Accuracy Slot Drive Arbor for More Accuracy and Quicker Change Out of Accessories
  • Swivel Base adds even greater versatility: Precisely line up your pilot with the holes center location, One stroke lock and unlock handle, Great for horizontal, overhead, tight areas, and getting out over another piece of steel, Patented USA MADE

Kanzawa Drill guide DX K-802

Kanzawa Drill guide DX K-802

    Features:

  • The main body is made of lightweight and durable die-cast aluminum.
  • The base has scribed lines to make it easy to find the center
  • The depth of the hole can be freely determined by adjusting the position of the stopper.
  • Thumbscrews are large in diameter and easy to tighten.
  • ※This product is the successor to the K-801. 【Product Details】 ・Chuck: 10mm drill chuck ・Shank: 10mm/round/three-sided ・Total length: 260mm ・Stroke: 130mm ・Weight: 1,350g

Big Gator Tools BGT V-4 Pack V-Drill Guide SAE + Number Hole Sizes 4pc Kit

Big Gator Tools BGT V-4 Pack V-Drill Guide SAE + Number Hole Sizes 4pc Kit

    Features:

  • Includes: (1) STD500NP, (1) STD1000DGNP, (1) STD2000DGNP & (1) SDGMINI
  • Special nickel alloyed steel heat treated for durability. Non-plated material with light oil coating to prevent rust.
  • Centers the holes on pipes, dowels & outside corners. Flat side allow 90° drilling into flat surfaces-just clamp and drill.. Automatically squares up the drill with the surface. Alignment marks on both sides, to line up on center.
  • Bottom surface is precision ground to ensure stability & accurate perpendicular alignment on flat surfaces. Round stock hole alignment marks on one side.
  • Prevents drill bit wander. Portable, pocket-sized and housed in a handy plastic storage case w/surface ridges to prevent opening, PegBoard-Friendly. Only shipping one of each V-Drill Guides “NO” other tools or ruler included

Kreg KPHJ520PRO Pocket-Hole Jig 520PRO, Blue

Kreg KPHJ520PRO Pocket-Hole Jig 520PRO, Blue

    Features:

  • Versatile jig for creating pocket-hole joints in materials from ½” to 1-½” thick
  • Unique, portable design makes jig adaptable to any workspace and project
  • VersaGrip handle rotates 360° and features built-in clamping
  • Sets up fast with easy-to-use material thickness settings
  • GripMaxx anti-slip holds material in place to prevent shift while drilling
  • Includes 100 screws to build included project plan
  • Includes 2″ Face Clamp for project assembly
  • Convert to benchtop with the addition of the Kreg Docking Station

Milescraft 1312 DrillBlock- Handheld Drill Guide

Milescraft 1312 DrillBlock- Handheld Drill Guide

    Features:

  • Centerlines ensure accurate alignment when drilling into various surfaces
  • Non-slip feet holds the Drillblock in place while preventing both slipping and marring on wooden work pieces
  • The two product v-grooves allow for usage on corners and even cylindrical surfaces too
  • Package dimensions:3.05″L x 5.33″W x 14.48″H

Wolfcraft 4525404 Multi-Angle Drill Guide Attachment For 1/4In. & 3/8In. Drills,Silver

Wolfcraft 4525404 Multi-Angle Drill Guide Attachment For 1/4In. & 3/8In. Drills,Silver

    Features:

  • Drill Guide That Can Be Used In Horizontal, Vertical Or Angle Positions
  • Guide-Bars Themselves Have Springs For A Quick Return When Doing Repetitive Drilling
  • Drill Adapter Itself Slides Up And Down On Guide-Bars
  • Angle Positions Can Go Up To 45 Degrees, And Rubber Pads In The Base Hold The Guide In Place

Kings County Tool Portable Drill Guide Jig | Convert Hand Drill to Drill Press | Bore Up To 45-Degree Angles | 3/8-Inch Shaft and Chuck | 5-Degree Increments | Depth Stop Included

Kings County Tool Portable Drill Guide Jig | Convert Hand Drill to Drill Press | Bore Up To 45-Degree Angles | 3/8-Inch Shaft and Chuck | 5-Degree Increments | Depth Stop Included

    Features:

  • JUST USE YOUR DRILL – A hand-held drill now gets the control of a drill press with this steel and plastic jig
  • BORING, IN A GOOD WAY – Angle boring up to 45-degrees is easily controlled and moved in 5-degree increments
  • STANDARD SIZE – 3/8″ shaft and chuck are used for this quick tool conversion while it works smooth with no wobble
  • PRECISE USE – A reliable depth stop is included to ensure each task goes as expected
  • ADD TO TOOL CHEST – This drill guide makes a great addition to any tool chest and is portable for when necessary

As an Amazon Associate I earn from qualifying purchases.

Random products:

oakley sunglasses
colloidal silver generators