Milescraft 1318 Drillmate Drill Guide with chuck

Milescraft 1318 Drillmate Drill Guide with chuck

    Features:

  • Perfect for straight or angled drilling, drilling on the edge of a board or on round stock
  • Attaches to all 3/8″ And 1/2″ Power drills and it also includes a 3/8″ Capacity chuck with key
  • Angle cuts of 45 Degree to 90 degrees, with a built in angle read out in the all metal base
  • Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter
  • Adjustable depth stop and spring action control of the head

Big Gator Tools V-Tap Guide, Standard Sizes 0-80 to 5/8″

Big Gator Tools V-Tap Guide, Standard Sizes 0-80 to 5/8"

    Features:

  • 90 degree V-groove along the bottom allows perpendicular alignment on round parts or corners.
  • Eliminate tap breakage due to improper alignment.
  • Automatically squares up the tap with the surface.
  • Portable, pocket size

Drill Bit Guide Jig 5/6/7/8/9/10mm Woodworking Tool Drill Punch Guide Locator Vertical Drilling Fixture (Yellow)

Drill Bit Guide Jig 5/6/7/8/9/10mm Woodworking Tool Drill Punch Guide Locator Vertical Drilling Fixture (Yellow)

    Features:

  • The drill bit guide jig is made of high quality steel. It is light weight and comes with a firm structure.
  • The vertical drilling fixture is suitable for opening diameter 5/6/7/8/9/10mm.
  • Precise positioning of the vertical drilling fixture makes your opening more easy and precise.
  • The drill bit guide jig can effectively improve the speed and quality of woodworking operations.
  • The drill bit guide jig centerlines ensure accurate alignment when drilling into various surfaces

Quick-Set Cabinet Drilling Jig/Template for Easy Installation for Handles and Knobs on Doors and Drawer Fronts-Blue Stainless Steel.

Quick-Set Cabinet Drilling Jig/Template for Easy Installation for Handles and Knobs on Doors and Drawer Fronts-Blue Stainless Steel.

    Features:

  • For precise drilling and positioning of handles on doors, flaps and drawer fronts
  • Cuts the hardware install time by 80%
  • Jig is made of virtually indestructible aluminum and ABS plastic
  • Reversible for quick drilling
  • It is useful for many other applications as well

Milescraft 1312 DrillBlock- Handheld Drill Guide

Milescraft 1312 DrillBlock- Handheld Drill Guide

    Features:

  • Centerlines ensure accurate alignment when drilling into various surfaces
  • Non-slip feet holds the Drillblock in place while preventing both slipping and marring on wooden work pieces
  • The two product v-grooves allow for usage on corners and even cylindrical surfaces too
  • Package dimensions:3.05″L x 5.33″W x 14.48″H

Drill Guide Dowel Kit Jig with 6 Bushings 3/16”, 1/4”, 5/16”, 3/8”, 7/16″ and 1/2”

Drill Guide Dowel Kit Jig with 6 Bushings 3/16”, 1/4”, 5/16”, 3/8”, 7/16" and 1/2”

    Features:

  • Drill perpendicular holes on flat edges, spheres, cylinders and corners
  • 3″ see-through square base
  • Includes bushing sizes 3/16”, 1/4”, 5/16”, 3/8”, 7/16 and 1/2″
  • Includes centering pins

Festool 492636 Parallel Edge Guide With Fine Adjustment For OF 1400 Router

Festool 492636 Parallel Edge Guide With Fine Adjustment For OF 1400 Router

    Features:

  • Rout up against, or perfectly parallel to the material edge, for precise dados, flutes, grooves, ploughs, rabbets and profiles
  • Fine-adjustment control allows you to dial in the distance from the material edge in increments of 1/10mm for ultra-precise routing
  • Dust extraction hood enables ultra-efficient dust extraction, saving valuable cleanup time
  • Attaches quickly and easily using integrated thumbscrews and two steel rods included in the router’s scope of delivery
  • Constructed from durable cast aluminum, and includes fiber-reinforced plastic thumbscrews for easy adjustment and a long service life

Kanzawa Drill guide DX K-802

Kanzawa Drill guide DX K-802

    Features:

  • The main body is made of lightweight and durable die-cast aluminum.
  • The base has scribed lines to make it easy to find the center
  • The depth of the hole can be freely determined by adjusting the position of the stopper.
  • Thumbscrews are large in diameter and easy to tighten.
  • ※This product is the successor to the K-801. 【Product Details】 ・Chuck: 10mm drill chuck ・Shank: 10mm/round/three-sided ・Total length: 260mm ・Stroke: 130mm ・Weight: 1,350g

Milescraft 4017 ClampAnchors – Bench Clamp Base Set

Milescraft 4017 ClampAnchors - Bench Clamp Base Set

    Features:

  • ClampAnchors have a diameter of 2″ and a height of 9 mm
  • Mounts flush to workbench surface
  • 2″ Forstner bit included that has a diameter of 2″ and height of 9 mm for flush mounting of anchors
  • With the included T-bolt hardware, your BenchClamps can be used with T-tracks
  • All hardware for bench mounting is included

Kings County Tool Portable Drill Guide Jig | Convert Hand Drill to Drill Press | Bore Up To 45-Degree Angles | 3/8-Inch Shaft and Chuck | 5-Degree Increments | Depth Stop Included

Kings County Tool Portable Drill Guide Jig | Convert Hand Drill to Drill Press | Bore Up To 45-Degree Angles | 3/8-Inch Shaft and Chuck | 5-Degree Increments | Depth Stop Included

    Features:

  • JUST USE YOUR DRILL – A hand-held drill now gets the control of a drill press with this steel and plastic jig
  • BORING, IN A GOOD WAY – Angle boring up to 45-degrees is easily controlled and moved in 5-degree increments
  • STANDARD SIZE – 3/8″ shaft and chuck are used for this quick tool conversion while it works smooth with no wobble
  • PRECISE USE – A reliable depth stop is included to ensure each task goes as expected
  • ADD TO TOOL CHEST – This drill guide makes a great addition to any tool chest and is portable for when necessary

As an Amazon Associate I earn from qualifying purchases.

Random products:

macbook air
nintendo switch