New Super Sharp

New Super Sharp

    Features:

  • Different Challenging levels

Gaosi Tools Woodworking Tool Drill Guide Vertical Drilling Fixture

Gaosi Tools Woodworking Tool Drill Guide Vertical Drilling Fixture

    Features:

  • Material: Aluminum alloy 6061 ( anodized surface )
  • Net Weight: about 100g
  • Centerlines ensure accurate alignment when drilling into various surfaces
  • Packing:1PCS main body Drill Guide(not include drill);6PCS drill bushing(6//7/8/9/10mm )
  • Product Size:80mmX54mm

Milescraft 1318 Drillmate Drill Guide with chuck

Milescraft 1318 Drillmate Drill Guide with chuck

    Features:

  • Perfect for straight or angled drilling, drilling on the edge of a board or on round stock
  • Attaches to all 3/8″ And 1/2″ Power drills and it also includes a 3/8″ Capacity chuck with key
  • Angle cuts of 45 Degree to 90 degrees, with a built in angle read out in the all metal base
  • Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter
  • Adjustable depth stop and spring action control of the head

Kings County Tool Portable Drill Guide Jig | Convert Hand Drill to Drill Press | Bore Up To 45-Degree Angles | 3/8-Inch Shaft and Chuck | 5-Degree Increments | Depth Stop Included

Kings County Tool Portable Drill Guide Jig | Convert Hand Drill to Drill Press | Bore Up To 45-Degree Angles | 3/8-Inch Shaft and Chuck | 5-Degree Increments | Depth Stop Included

    Features:

  • JUST USE YOUR DRILL – A hand-held drill now gets the control of a drill press with this steel and plastic jig
  • BORING, IN A GOOD WAY – Angle boring up to 45-degrees is easily controlled and moved in 5-degree increments
  • STANDARD SIZE – 3/8″ shaft and chuck are used for this quick tool conversion while it works smooth with no wobble
  • PRECISE USE – A reliable depth stop is included to ensure each task goes as expected
  • ADD TO TOOL CHEST – This drill guide makes a great addition to any tool chest and is portable for when necessary

Dowel Drill Press Guide Jig,6/7/8/9/10mm Drill Bushings Vertical Hole Woodworking for Electric Power Hand Drill (Blue)

Dowel Drill Press Guide Jig,6/7/8/9/10mm Drill Bushings Vertical Hole Woodworking for Electric Power Hand Drill (Blue)

    Features:

  • 【Drill Guide Jig for Vertical Hole Drilling】This is a set of drill guide tools for the fixation and centering while drilling and woodworking
  • 【Drill Guide Body + 5 Drill Bushings】The drill guide jig has 5 drill bushings and their diameters are 6mm,7mm,8mm,9mm,10mm/0.24,0.28,0.32,0.35,0.39inch respectively.It is rather easy to change the bushing thread into the drill guide jig.
  • 【Accurate Drilling】Centerlines ensure accurate alignment when drilling into various surfaces.By holding the drill guide body, easy to get vertical hole drilled without any deviation
  • 【Aluminium Alloy】The drill guide is made of premium aluminium alloy, it is of strong strength and long durability
  • 【Practical Woodworking Tool】The hole jig is a great tool set for both furniture factory and woodworking enthusiasts

Milescraft 1312 DrillBlock- Handheld Drill Guide

Milescraft 1312 DrillBlock- Handheld Drill Guide

    Features:

  • Centerlines ensure accurate alignment when drilling into various surfaces
  • Non-slip feet holds the Drillblock in place while preventing both slipping and marring on wooden work pieces
  • The two product v-grooves allow for usage on corners and even cylindrical surfaces too
  • Package dimensions:3.05″L x 5.33″W x 14.48″H

V-Drill Guide Standard Hole Sizes 1/8-1/2 Inches – 2 Pack

V-Drill Guide Standard Hole Sizes 1/8-1/2 Inches - 2 Pack

    Features:

  • STD1000DGNP V-DrillGuide (1/8-3/8″) has 17 holes 1/64″ increments (SAE) drill sizes: 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 23/64, 3/8″
  • STD2000DGNP V-DrillGuide (3/8-½”) has 9 holes, in 1/64 increment (SAE) drill sizes: 3/8, 25/64, 13/32, 27/64, 7/16, 29/64, 15/32, 31/64, ½”
  • Portable, pocket-sized * Prevents drill bit wander * Centers the holes on pipes, dowels & outside corners
  • Round stock hole alignment marks on one side * Special nickel alloyed steel heat-treated for durability
  • Non-plated material with light oil coating to prevent rust * Non-glare finish with/Easy-to-read markings * American Engineered and Made in the USA

Big Gator Tools STD1000DGNP V-Drill Guide

Big Gator Tools STD1000DGNP V-Drill Guide

    Features:

  • 17 drill sizes, from 1/8″ to 3/8″, in 1/64″ increments
  • Use on flat surfaces, round parts, and corners
  • Special nickel alloyed steel heat treated for durability
  • Non-plated material with light oil coating to prevent rust
  • Alignment marks on guide to line up on center

DCT SAE Drill Bit Guide Centering Punch 8-pc Center Drilling Set Kit – 3/16 to 1/2in Bushings, Locating Pin, Guide

DCT SAE Drill Bit Guide Centering Punch 8-pc Center Drilling Set Kit – 3/16 to 1/2in Bushings, Locating Pin, Guide

    Features:

  • PRECISE DRILL GUIDE: Use the DCT Standard SAE Drill Bit Guide Set to accurately locate exact drilling centers and guide drill bits perfectly perpendicular to the woodworking piece on flat, round, spherical, and corner edges; Economical drill press substitute with top quality and precision (not a clamp or vise substitute); Additionally use as a quick and accurate dowel drilling guide for edge joining
  • DRILL ANY SHAPE BOARD: Drill perfectly straight holes through even the thickest board no matter what the shape of the piece being drilled; Drill on sides, edges, spheres, and cylinders; For spheres, use disc-shaped recess on bottom of drill guide; For cylinders and edges (especially drilling pipe and dowels), use V-shaped groove on bottom of drill guide to position drill guide
  • QUICKLY FIND CENTER: Drop the included locating center punch pin inside the 3/16-inch bushing (one way fit – flat top of pin first into bottom of bushing – do not attempt pointed tip end into bushing) and then center over the spot to drill; To find the center line on an edge, place 2 small nails (not included) in drill guide holes and turn drill guide so each nail touches opposite side of the wood
  • VARIETY OF SAE SIZES: Standard (SAE) drill bushing sizes include 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, and 1/2” inch; Each drill bushing has permanently laser-etched size markings for quick identification
  • CONTENTS: Package includes (1) guide, (1) locating pin, and (6) standard drill bushings for your convenience

Wolfcraft 4525404 Multi-Angle Drill Guide Attachment For 1/4In. & 3/8In. Drills,Silver

Wolfcraft 4525404 Multi-Angle Drill Guide Attachment For 1/4In. & 3/8In. Drills,Silver

    Features:

  • Drill guide that can be used in horizontal, vertical or angle positions
  • Guide-bars themselves have springs for a quick return when doing repetitive drilling
  • Drill adapter itself slides up and down on guide-bars
  • Angle positions can go up to 45 degrees, and rubber pads in the base hold the guide in place
  • Fits all 1/4-inch or 3/8-inch drills

As an Amazon Associate I earn from qualifying purchases.

Random products:

nintendo switch console
felt chair pads