Fowler 52-475-050-0 Hardened Steel All-Angle V-Block and Clamp with 1.312″ Holding Capacity
- Angle Clamp: The sides of this clamp set are parallel while the V is central and ground with a central hole provided for drilling or removing pins
- Machinist Tool: V-block set has four 3/8″-16 tapped holes, two in the bottom and one on each side for angle non-clamping; used for grinding, milling, or drilling
- Durable Construction: Made of hardened and precision ground tool steel, this angle V-block is perfect for grinding, milling, or drilling
- Dimensions: This V-clamp is 3-5/8″ long, 1-7/8″ wide, and 1-7/8″ high (including clamp) with a holding capacity of 1-5/16″
- High Accuracy: Sides are parallel and V is central and ground to .0003″
Features:
Groz 03001 Precision V-Block and Clamp, 50 x 37 x 37mm
- Acc BS 3731 Grade 2
- 55-60 HRC Hardened Steel
- Block Length: 2″
- Block Width: 1.5″
- Block Height: 1.5″
Features:
HFS (R) Type B V-Block & C Clamp Set (1-5/8″×1-1/4″×1-1/4″)
- Precision V-block
- Made of high quality steel
- All sides are ground square and parallel to each other
- Matched in pairs
Features:
Anytime Tools 8 pc V-Block & Clamp Double Sided 90° Machinist Tool
- Kit Includes 2 pairs 1-1/4″ x 1-1/4″ x 1-5/8″ & 1-1/2″ x 1-1/2″ x 2″
- V-Blocks made of chrome steel and hardened to Rockwell 60C and ground.
- All sides are ground square and parallel to each other.
- V-Block sets include clamps
Features:
TTC 117 1″ Toolmaker’s V-Block & Clamp Set
- 1″ clamping capacity
- Excellent choice for layout, machining and inspection work.
- Made of hardened tool steel machined and ground in pairs to close tolerances.
- Blocks are approximately 1-1/4″ square by 1-5/8″ long.
Features:
Grizzly Industrial H5608 – V-Block Pair w/Clamps 1-5/8″
- 1 5/8″ X 1 1/4″ X 1 1/4″
- 1″ capacity
- Numbered and matched pairs are precision ground for accuracy.
Features:
TINVHY 2-3/8In x 2-3/8In x 2In Multi-Use V-Block and Clamp Machinist Set with Box, Hardened Steel
- Stepped groove construction permits low or high clamping
- Made of hardened and ground chrome steel
- All sides precision ground parallel and square
- Size (L x W x H): 2-3/8 x 2-3/8 x 2Inch; Capacity Round 2Inch. Capacity Square 1-3/16Inch; Clamps are included
- 90 degrees V groove accuracy are central, parallel and square with all surfaces within 0.0003Inch
Features:
HHIP 3402-0002, 2-3/8 L X 2-3/8 W X 2 H Precision V-Block & CLAMP Set
- Hardened & ground to RC 58-60
- 90° Vee blocks
- Supplied in a matched pair
- Supplied with bolts and clamps in wooden case
Features:
2-3/8” x 2-3/8” x 2” V Block & Clamp Set Multi-use Gauge Gage Machinist Tool
- V block clamp set ; V-Blocks are 90
- Block Size: 2-3/8 X 2-3/8 X 2″;Diameter Min.: 13/64″; Capacity Max: 1-3/16″
- All sides ground square and parallel to each other;”V”are ground central, parallel,square to the end
- Made of hardened and ground chrome steel ;Wooden storage case INCLUDED
- Quantity: 1 ; Shipping Weight: 5 lbs ; Wooden storage case dimension:3-1/2”L x 6-1/4”W x 3-1/2”
Features:
As an Amazon Associate I earn from qualifying purchases.