HGLRC Zeus350mW VTX M2 M3 16×16 20×20 25.5×25.5 5.8GHz Built-in Microphone Switchable FPV Transmitter VTX Betaflight for FPV Racing Drone Quad (SMA)
- 【 Real customers’ review 】 Works well inside the house. Decent VTX ; VTX is well made, robust and simple to solder up. HGLRC also provides good wiring diagrams online if you look for them.
- 【Power switchable 】PIT/25/100/200/350mW Switchable Transmission VTX via Betaflight Flight Control Board
- 【Built-in Microphone 】So you can listen to your motors while you fly, it’s easy to find out the drone , no matter how far away you fly
- 【 Easy Operation 】Very easy to welding , friendly to beginner or professional racing drones , easy to fix in a 20×20 tower
- 【Why Choose Us 】 We are the Original HGLRC manufactory , If there are any question or need any help , pls feel free contact us , we will always here help you out within 24 hours . Choose us risk free today 🙂
Features:
SoloGood Rush Tank FPV Transmitter 5.8GHz 48CH Mini PIT/25/200/500/800mW VTX Video Transmitter 20x20mm External-Audio MMCX Elbow Connector with Rush Cherry Antenna 5.8GHz RHCP for FPV Racing Drone …
- Newly Design: New design of side LED indicator light. More intuitive status reading. Simple inastallation, Intuitive operation. The superior performance
of Tank ULTIMATE Mini, allowing 8 drones racing in the same band, without any interference - Lightweight design: It’s used all the core technologies of TANK family and is compact size, with a full-metal shell covering, weighs only 4.46g(without case)
- Impregnable Power: The new designed power filter system allows TANK RACING to work stably by any power system that pursues its limits without
interference from power supply - Pit Mode: After entering the pit mode, the VTX power will be reduced to minimum. The video feed is only visible to yourself at close range, so don’t worry
about disturbing others - Come with A gift: RUSH Cherry FPV antenna RHCP MMCX connector, easy to use and pair perfectly
Features:
iFlight SucceX Mini Force 5.8GHz PIT/25mW/200mW/400mW/600mW VTX Adjustable with MMCX Connector for FPV Drone Part
- 1. New 5.8GHz Mini Force VTX, 40CH in one. 20*20mm 3mm / 25.5*25.5mm 2mm Mounting hole
- 2. iFlight FPV Mini VTX 25mW/200mW/400mW/600mW adjustable.
- 3. Mini VTX ensures that there’s no snowflake or horizontal stripes on video even under the 100% throttle。
- 4. Pit Mode allows you to power up safely without the risk of knocking other pilots out of the air, it can also support 8 pilots fly drones at the same time。
- 5. It enables changing the channel, transmits power, and more from Betaflight OSD, flight controller USB port, Taranis, and more
Features:
AKK FX3 5.8Ghz 25mW/200mW/400mW/600mW Switchable FPV VTX with MMCX Integrated OSD FC Configuring via Betaflight Flight Control Board
- 25mW/200mW/400mW/600mW power switchable.
- Support OSD Configuring via Betaflight Flight Control Board.
- 7-24V input and can be provides 5V output for your camera.
- VTX 5V Out for Cam, Operating Voltage: 7-24V, Output Voltage(VOUT): 5V, support 2S-6S battery only
- One button setup channel/band/power with LED display,Filtered power ensure super clean video, born for racing.
Features:
AKK FX3-ultimate 5.8GHz 25mW/200mW/400mW/600mW Switchable Mini VTX Support OSD Configuring via Betaflight
- 7-24V input, 5V output for your camera
- 25mW/200mW/400mW/600mW power switchable
- With MIC, OSD configuration using Smart audio
- MMCX+UFL,Solder Pads connector, One button setup channel/band/power
- 0.01mW parameter-adjusting Mode, power with zero interference.
Features:
AKK A20 5.8G Long Range VTX 25mW/200mW/600mW/1000mW Switchable DVR Transmitter Upgraded Long Range Transmitter Support OSD Configuring
- The FPV VTX is an upgraded version of FX3 ultimate, with DVR
- Micro VTX support Smart Audio
- Antenna connector: solder pads, 7-28V input with 5V output
- The VTX has long transmission distance and clear image
- MMCX VTX, Dimensions: 36(W) x 36(D)mm, 30.5 x 30.5mm(hole); Weight: 9.6g
Features:
5.8GHz FPV VTX PIT/25/200/600/1000mW Switchable FPV DVR Transmitter with Microphone Support OSD Configuration Using Smart Audio Upgraded Long Range Version for FPV Racing Drone Quadcopter RC Car
- 【Built-in Microphone 】Integrated with Microphone and UART,You can hear your quad even though it is flying too far.
- 【Power switchable ,support long range flight】5.8GHz 25mW/200mW/600mW/1000mW switchable power, support long range flight
- 【Compatible with betaflight 3.2 and 3.3】Support parameter adjusted and work with Betaflight controller, Support Smart audio and OSD Configuring
- 【DVR VTX】 Max Support TF Card: 32G, Maximum recording time of each video : 5 minutes , Records Video Size: VGA(640*480), 29fps, loop recording
- 【 Easy To install 】 Super mini size (30.5mm*30.5mm) and light weight,One button frequency and power setup.
Features:
PandaRC FPV Transmitter VT5804 Mini 20×20 5.8ghz 40 CH with raceband FPV VTX Support Smart Audio…
- 25mW/50mW/100mW/200mW/400mW Switchable
- Mounting hole: 20x20mm
- Micro VTX support Smart Audio-IRC-tramp
- Pit Mode allows you to power up safely without the risk of knocking other pilots out of the air.,it can also support 8 pilots fly drones at the same time
- 2S-6S input Power Supply, 5V output for camera
Features:
Wolfwhoop Q4 5.8GHz VTX with MMCX Antenna Connector and 0.01/25/200/400/600mW 37CH Switchable FPV Transmitter with Smart Audio Support OSD Configuring via Betaflight Flight Controller
- 7-24V input with 5V output, Support parameter remotely adjusted by Betaflight, flight controller, OSD, Compatible with betaflight 3.3 and 3.2
- MMCX has more mating cycles and is more robust
- This VTX is that you can mount it on top of your mini FC/PDB stack thanks to the 20x20mm mounting pattern
- 0.01mW-Power up and test your fpv system during a race with zero interference with any neighbor active channels
- FC Uart is basically a feature that allows your to change your VTX settings in Betaflight OSD or even from your Taranis Screen using LUA scripts
Features:
Tiny XF5805 20×20 FPV VTX Transmitter 5.8G Long Range Support Smart Audio Pit 25mW 100mW 200mW 300mW Switchable Stack Mounting IPEX Input OSD Configuration for FPV Multicopter…
- IPEX input and flight stack(Suitable for CC3D NAZE32 F3 F4 Flight Controller) mounting pattern OSD configuration using smart audio.
- 5.8GHz,compatible with Betaflight OSD Support parameter remotely adjusted by Betaflight, flight controller, OSD. Support Smart audio.
- 7-26V input with 5V for Camera,one button frequency and power setup,0.01mW to prevent adjacent channel interference,25mW/100mW/200mw/300mW power switchable.
- Tiny little noise and Compact;Smaller size, lighter weight and four mounting holes are more convenient to install.
- Pit Mode allows you to power up safely without the risk of knocking other pilots out of the air.,it can also support 8 pilots fly drones at the same time.
Features:
As an Amazon Associate I earn from qualifying purchases.