TEKTON 10 to 17 Inch Telescoping Basin Wrench (3/8-1-3/8 in.) | WRN92002

TEKTON 10 to 17 Inch Telescoping Basin Wrench (3/8-1-3/8 in.) | WRN92002

    Features:

  • Fits 3/8 to 1-3/8 in. diameter nuts on faucets, supply lines, valves and drains
  • Long-reach telescoping shaft extends from 10 to 17 inches, adapting to any situation
  • 180-degree pivoting head holds its position at any angle to access hard-to-reach nuts
  • Spring-loaded jaw automatically adjusts to size and creates a continuous ratcheting action that stays engaged with the nut after each turn
  • Removable 6-inch, high-leverage handle allows compact storage in drawer or toolbox

Wrench Spanner Multi‑Purpose Outdoor Porfessional Tool

Wrench Spanner Multi‑Purpose Outdoor Porfessional Tool

    Features:

  • Made of steel 4140, powder coated.
  • Length 11.42 in,Width 2.56 in,Thickness 0.24 in.
  • Fits all – Mil-Spec Castle Nuts and Commercial Castle Nuts. For all tubes with an OD of 1-3/8″ (1.375 in) . Perfect for all areas these castle nuts are used, plumbing, pipe fitting, hunting, fishing rods, safes, automotive, etc.

MulWark 20pc 1/4 Ultra Low Profile Mini Ratchet Wrench Close Quarters Screwdriver Set with High Torque – Right Angle EDC Tool with 90 Degree Mini Offset Reversible Drive Handle & Multi Hex Bits Set

MulWark 20pc 1/4 Ultra Low Profile Mini Ratchet Wrench Close Quarters Screwdriver Set with High Torque - Right Angle EDC Tool with 90 Degree Mini Offset Reversible Drive Handle & Multi Hex Bits Set

    Features:

  • ▲ COMPACT SIZE: The 4″ long 3/8″ thick driver handle is small enough for operation in confined places/ tight spaces/ tight spot where traditional bit driver, traditional ratcheting screwdriver or stubby screwdriver might be too large or bulky to fit, rendering easy fastening and unfastening with sufficient torque, especially in awkward places like U shape corner, lateral surface, etc.
  • ▲ DELICATE MECHANISM: This multi tip right angled combination screwdriver set is powered with a 16-teeth reversible ratchet system to ensure smooth ratcheting in both directions and enable precision adjustment; and the miniature pocket size close-quarters bit driver has magnetic like clip inside the hex bit holder help keep the inserted bit tight in position
  • ▲ COMPATIBLE FOR VARIOUS USAGE: The lightweight magnetic bit adaptor with higher levels of torque accepts any 1/4 inch hex bits of all styles. This whole set performs well in confined locations on machines, cars, boats, plane, RV, etc., or for household or work with “tight fit” repairs, installations or renovations, making it good to have around as part of an EDC and also a nice gift for professional handymen and do-it-yourselfers; this can also be transferred to a ratchet socket using an adapte
  • ▲ 19pc POPULAR-SIZE BITS: Made of heavy duty CRV6150 (chrome vanadium) steel with hardness of HRC51-55, these bits include: – 6pcs 25mm (1”) driver bits: #1, #2, #3 phillips head bits; 4.5mm, 7mm slotted head bits; #2 square head bits; -13pcs 20mm driver bits: 3mm, 4mm, 5mm, 6mm hex head bits; #1, #2 pozidriv head bits; #1, #2, #3 phillips head bits; 6mm slotted head bits; T15, T20, T25 security torx star screwdriver bits; coming with a cartridge as a good screwdriver bit organizer
  • ▲ LIFETIME WARRANTY: All MulWark tools are warranted to be free of defects in materials and workmanship for as long as you own the product, you may return this product free of charge with original purchase receipt or choose to get a replacement

Neiko 01324A Ultra Low Profile Offset Hex Screwdriver Set, 10-Piece | Heavy Duty S2 Steel Construction | SAE and Metric

Neiko 01324A Ultra Low Profile Offset Hex Screwdriver Set, 10-Piece | Heavy Duty S2 Steel Construction | SAE and Metric

    Features:

  • Utility selection of 10 hex tips for your everyday needs at home or at the shop; suitable for maintenance and repair of electronics, home appliances, equipment and more
  • Each hex bit is constructed of durable S2 alloy steel, with surface featuring visible color-coded driver shapes and sizes imprinted on body handle for clear and easy identification of bit measurements
  • Slim 3mm depth body handle with 15º bent angle by the drive head end makes for exceptional close quarters fastening in tight spaces
  • Designed with holes at the flat end to easily add and remove from spring snap key chain clip; easily swap, carry and store on the belt or in the tool storage shed
  • Set comes with ten hex drive sizes, SAE: 1/8, 5/32, 3/16, 7/32, 1/4-inch Metric: 2.5, 3, 4, 5, 6mm

KegWorks 1 x Heavy Duty Beer Faucet & Hex Nut Wrench

KegWorks 1 x Heavy Duty Beer Faucet & Hex Nut Wrench

    Features:

  • Steel with rubber grip
  • One side is a spanner wrench that helps tighten faucets to shanks or towers
  • The other side is a hex nut wrench which tightens the nut on your keg coupler
  • A very handy item to have
  • In stock and ready to ship

RIDGID 31305 Model E-110 Hex Wrench, 9-1/2-inch Offset Hex Wrench

RIDGID 31305 Model E-110 Hex Wrench, 9-1/2-inch Offset Hex Wrench

    Features:

  • Hex jaw design provides a multi-sided, secure grip on all hex nuts, square nuts, unions, and valve packing nuts
  • Wide jaw makes the hex pipe wrench easy to fit around large pipes
  • Thin, smooth jaws allow you to slip into tight areas effortlessly
  • 1-1/8-inch (29 mm) to 2-5/8-inch (67 mm) pipe capacity
  • RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool

Craftsman 2 Piece 16 Inch Rubber Strap Wrench Set, 9-45570

Craftsman 2 Piece 16 Inch Rubber Strap Wrench Set, 9-45570

    Features:

  • The large wrench manages items up to 6 3/8 inches in diameter
  • The small wrench manages items up to 4 inches in diameter
  • Straps are made of strong, reinforced rubber
  • Cushioned plastic handles are comfortable to hold
  • Backed by Craftsman’s Lifetime Guarantee

LG Electronics 3W20018B Washing Machine Leg Adjusting Spanner Wrench

LG Electronics 3W20018B Washing Machine Leg Adjusting Spanner Wrench

    Features:

  • LG Electronics part number 3W20018B
  • Washing machine leg adjusting spanner wrench
  • See product description for list of compatible models
  • Refer to your manual to ensure ordering the correct, compatible part

Tiger Wrench TW-MC12/4 ONTEL 48 Tools In One Socket | Works with Spline Bolts, 6-Point, 12-Point, Torx, Square Damaged Bolts and Any Size Standard or Metric

Tiger Wrench TW-MC12/4 ONTEL 48 Tools In One Socket | Works with Spline Bolts, 6-Point, 12-Point, Torx, Square Damaged Bolts and Any Size Standard or Metric

    Features:

  • Tiger Wrench uniquely designed tool that combines 48 tools into one and makes any repair quick & easy! By simply clicking between the different sizes you instantly have the tool you need for the job!
  • FAST, AND YOU NEED FAST! With Tiger Wrench you’ll always have the right tool for the job.
  • Can click to a 45 Degree angle to get those difficult to reach nuts and bolts.
  • THICK, HEAVY DUTY, professional tool that’s designed to tackle all your projects around the house, in the shop, or on the job!

WREOW (8 in 1)Multifunctional Faucet Wrench Tool,Double Head Sink Installer Tool Water Pipe Spanner Tackle For Plumbers And Homeowners (red)

WREOW (8 in 1)Multifunctional Faucet Wrench Tool,Double Head Sink Installer Tool Water Pipe Spanner Tackle For Plumbers And Homeowners (red)

    Features:

  • Functional:Suitable for Supply nuts/Shut off valves/Strainer Baskets/Supply Line Nut/Faucet Nuts.Open slot allows for easy access to existing supply lines:Toilet Bowl/Sink/Bathroom/Kitchen Plumbing and more.
  • Multi-purpose:Strainer basket attachment holds drain unit in place while tightening strainer nut
  • Labor Saving Design:With a rod being inserted in the tail hold, this tool for common faucet installations and sink strainers can easily to rotate at awkward angles without scratching your chrome
  • Extra-long design:Lets you to turn hard-to-reach mounting nuts on faucets, sprayers and ball cocks.
  • High Quality:Made of lightweight,high strength plastic construction and two durable aluminum inserts

As an Amazon Associate I earn from qualifying purchases.

Random products:

lnt3-2.5-w-g-led
ghq micro armour