Bora WTX Clamp Edge and Straight Cut Guide for Circular Saws | 50 Inch Cutting Length, 543050

Bora WTX Clamp Edge and Straight Cut Guide for Circular Saws | 50 Inch Cutting Length, 543050

    Features:

  • GET IT STRAIGHT – This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. Its long 50in length allows you to saw with precision and skill.
  • CONTRACTOR’S COMPANION – This tool is made for use with the Bora WTX Saw Plate (sold separately), and can be conveniently paired with your own circular saws, routers, jig saws, and other power tools.
  • LOCKED IN – The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won’t budge.
  • AS LONG AS YOU NEED – Modular design allows for additional extrusions to be added which can expand the guide up to 100 inches. With the WTX clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts.

Bora 100” WTX Ruled Clamp Edge Saw Guide for Woodworking, Contractors, Carpenters and DIY, Guide for Circular Saws, 100 Inch Cutting Length, 545100

Bora 100” WTX Ruled Clamp Edge Saw Guide for Woodworking, Contractors, Carpenters and DIY, Guide for Circular Saws, 100 Inch Cutting Length, 545100

    Features:

  • GET IT STRAIGHT EVERY TIME: This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. It’s long 100-inch length allows you to saw with precision and skill
  • LOCKED IN: The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won’t budge while you cut
  • MAKE MEASURING EASY: The WTX Clamp Edge has a ruled edge with both metric and imperial measurements to make your job of getting perfect cuts quick and easy
  • SUITED FOR YOUR NEEDS: The modular design allows for additional extensions to be added to expand your cutting length up to 100 inches. With the WTX clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts
  • ADDITONAL ACCESSORIES: The BORA WTX Saw Guide System has additional accessories include the Saw Plate, Track Clamps for cutting any angle, and the Router Guide
  • 100 INCHES OF CUTTING: With your purchase you will receive a 50″ WTX Clamp Edge and WTX 50″ Extension, connect the pieces together for 100 inches of straight cuts

Bora 543042K 36″ WTX Clamp Edge & Saw Guide Kit

Bora 543042K 36" WTX Clamp Edge & Saw Guide Kit

    Features:

  • Rigid aluminum straight edge guide with 36-inch capacity for making straight and accurate cuts
  • The saw guide works with most circular saws to help keep your saw straight to make accurate cuts
  • Fits right and left handed circular saws
  • Saw guide fits right handed and left handed circular saws

Bora 50″ WTX Clamp Edge & Saw Guide Kit

Bora 50" WTX Clamp Edge & Saw Guide Kit

    Features:

  • Item : Clamp Edge
  • Size : 50 in
  • Material : Aluminum
  • Throat Depth (In.) : 50 in
  • Application : Woodworking, DIY Applications

Bora WTX Clamp Edge and Straight Cut Guide for Circular Saws | 24-Inch Cutting Length, 543024

Bora WTX Clamp Edge and Straight Cut Guide for Circular Saws | 24-Inch Cutting Length, 543024

    Features:

  • GET IT STRAIGHT – This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. Its long 24 inch length allows you to saw with precision and skill.
  • CONTRACTOR’S COMPANION – This tool is made for use with the Bora WTX Saw Plate (sold separately), and can be conveniently paired with your own circular saws, routers, jig saws, and other power tools.
  • LOCKED IN – The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won’t budge.
  • AS LONG AS YOU NEED – Modular design allows for additional extrusions to be added which can expand the guide up to 100 inches. With the WTX clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts.

Bora 50-Inch Ruled WTX Clamp Edge and Saw Plate Set | 545056K

Bora 50-Inch Ruled WTX Clamp Edge and Saw Plate Set | 545056K

    Features:

  • WTX Clamp Edge is made of heavy-gauge, extruded aluminum for extreme durability
  • Adjustable clamp end on straight edge slides easily up and down to fit material to be cut
  • Locking clamp edge handle grabs work surfaces for a secure edge that won’t budge
  • Clamp Edge includes ruled edge for easy measuring
  • Adjustable channel on saw plate fits a wide variety of straight edges up to 3. 5” wide
  • Fits right- and left-handed circular saws

Bora Saw Plate – The Easy To Use Saw Sled/Circular Saw Guide That ensures Straight, Precise Cuts. Easily Rip Plywood or Other Sheet Material To Your Exact Specifications & Measurements | 544006

Bora Saw Plate – The Easy To Use Saw Sled/Circular Saw Guide That ensures Straight, Precise Cuts. Easily Rip Plywood or Other Sheet Material To Your Exact Specifications & Measurements | 544006

    Features:

  • Works with the Bora WTX Clamp edges and Bora NGX clamp edges
  • Versatile – Fits right- and left-handed circular saws
  • Improved Front fence minimizes side to side tool movement
  • New side stop allows you to replace the tool in exactly the same place, every time
  • Low profile front Clamps allow a greater range of placement
  • Friction fit cut indicator doesn’t require tools to adjust or lock in place
  • Secure – 3 points of contact means your saw is held securely while cutting
  • Replaces Bora saw plate – 542006

Bora 100-Inch NGX Clamp Edge, Straight Cut Guide For Circular Saws Includes 50-Inch Clamp Edge & 50-Inch Extension For 100-Inch Cutting Length, 544100

Bora 100-Inch NGX Clamp Edge, Straight Cut Guide For Circular Saws Includes 50-Inch Clamp Edge & 50-Inch Extension For 100-Inch Cutting Length, 544100

    Features:

  • Clamping end moves with handle for easy adjustability from one side
  • Locking handle grabs work surfaces for a secure grip that won’t budge
  • Made of heavy-gauge, rigid aluminum for extreme durability
  • Use with circular saws, routers, Jig saws, and other portable power tools
  • Includes Bora NGX 50-inch clamp edge and Bora NGX 50-inch extension piece with connectors

Bora Saw Guide System Track Clamps – Two Pack, Use to Cut Any Angle with the Bora WTX and NGX Saw Guide Systems, Saw Guide Accessory for Woodworkers, DIYers, Carpenters, 542011

Bora Saw Guide System Track Clamps – Two Pack, Use to Cut Any Angle with the Bora WTX and NGX Saw Guide Systems, Saw Guide Accessory for Woodworkers, DIYers, Carpenters, 542011

    Features:

  • CUT ANY ANGLE: The Bora Track Clamps are designed to work with the Bora WTX and NGX Saw Guide System allowing you to cut virtually any angle. These add additional versatility to the WTX and NGX Saw Guides
  • FAST, ACCURATE, AND REPEATABLE: These clamps will make cutting angles fast, easy, and accurate with your Bora WTX or NGX Saw Guide. Help speed up cutting down panel material such as plywood or MDF
  • HOLD CUTTING STOPS: When making blind cuts the Track Clamps can be used to hold stops in place
  • EASILY ADJUSTS: Use the fast-acting lock nut by simply pushing the bottom into the side, then release and turn to tighten
  • NON-MARKING GRIP: Rubberized feet on the track clamps give a sold non-marking grip on your material
  • SOLD AS SET: The Bora Track Clamps come as a pair

ProGrip Straight Edge Clamps Ideal for Cutting Large Sheets of Plywood and Dado Slots (All 3 Clamps 24, 36 and 50 inch)

ProGrip Straight Edge Clamps Ideal for Cutting Large Sheets of Plywood and Dado Slots (All 3 Clamps 24, 36 and 50 inch)

    Features:

  • No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.
  • Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
  • Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
  • How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
  • The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!

As an Amazon Associate I earn from qualifying purchases.

Random products:

sqm20.18502
inq28 donation model