Bora Jigsaw Guide For WTX or NGX Clamp Edge. Use for making Straight Cuts & As A Steady Guide for your Jigsaw -542009
- Made for jigsaws – this jigsaw guide is specifically designed to fit most jigsaws
- Easy to use – the jigsaw guide attaches easily to the Bora clamp edge, and your Jigsaw seamlessly fits into it, allowing for precise straight cuts
- Solid design – With two “tongue and groove” Points that slide into the Bora clamp Edge’s side grooves, it’s a firm, steady guide for your Jigsaw
- Fully adjustable – the sliding side points and locking screw allow it to accommodate almost any size Jigsaw. Adjustable pointer guide keeps cuts true
- An ideal woodworking accessory – made to use with our Bora Clamp edge range to help you achieve straight cuts with your Jigsaw
Kreg KMA2685 Rip-Cut Circular Saw Guide , Blue
- Make rip cuts and crosscuts up to 24″ Wide
- Cut multiple pieces to the same size With just one setup
- Use the oversize edge guide for precise control throughout the cut
- Eliminate need for marking, measuring, and layout lines
- Take your saw to the material instead of having to take your material to the saw
Bora 542007 Rip Guide for Bora Saw Plate 542006. The Circular Saw Guide Rail that Produces Straight Cuts up to 24”
- The rip guide can be used with Bora WTX saw plate to make precise, straight cuts up to 24”
- Extruded aluminum rail attaches securely for confident cuts
- Comfortable, adjustable rip handle ensures solid grip
- Easily fits into your toolbox so you can take it anywhere
Bora 542006 WTX Saw Plate – The Easy to Use Saw Sled / Circular Saw Guide That Ensures Straight, Precise Cuts. Easily Rip Plywood or Other Sheet Material to Your Exact Specifications and Measurements
- Use with your circular saw to cut with unmatched precision. Convenient – your saw can still be used for free hand cutting with the plate attached
- Easy to use, yet extremely secure, with three points of connection to saws.
- The adjustable channel ensures it fits a wide variety straight edges guides (up to 3 1/2″ wide)
- Keeps and guides your circular saw straight and true while cutting, without wobble or binding
- Fits right and left handed circular saws. Sled Measures 8″ x 14″ x 7/8″
- Clamps to most circular saws for track saw like precision
- Works directly with the BORA WTX, WT and Original Clamp Edge Series
- Fits right and left handed circular saws
- Saw can be used for free hand cutting with the circular saw plate attached
Bora WTX Clamp Edge and Straight Cut Guide for Circular Saws | 50 Inch Cutting Length, 543050
- GET IT STRAIGHT – This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. Its long 50in length allows you to saw with precision and skill.
- CONTRACTOR’S COMPANION – This tool is made for use with the Bora WTX Saw Plate (sold separately), and can be conveniently paired with your own circular saws, routers, jig saws, and other power tools.
- LOCKED IN – The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won’t budge.
- AS LONG AS YOU NEED – Modular design allows for additional extrusions to be added which can expand the guide up to 100 inches. With the WTX clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts.
Bora 100” WTX Ruled Clamp Edge Saw Guide for Woodworking, Contractors, Carpenters and DIY, Guide for Circular Saws, 100 Inch Cutting Length, 545100
- Get It Straight Every Time: This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. It’s long 100-inch length allows you to saw with precision and skill
- Locked In: The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won’t budge while you cut
- Make Measuring Easy: The WTX Clamp Edge has a ruled edge with both metric and imperial measurements to make your job of getting perfect cuts quick and easy
- Suited For Your Needs: The modular design allows for additional extensions to be added to expand your cutting length up to 100 inches. With the WTX clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts
- Additional Accessories: The BORA WTX Saw Guide System has additional accessories including the Saw Plate, Track Clamps for cutting any angle, and the Router Guide
- 100 Inches Of Cutting: With your purchase you will receive a 50″ WTX Clamp Edge and WTX 50″ Extension, connect the pieces together for 100 inches of straight cuts
Bora Saw Guide 544006
- Works with the Bora WTX Clamp edges and Bora NGX clamp edges
- Versatile – Fits right- and left-handed circular saws
- Improved Front fence minimizes side to side tool movement
- New side stop allows you to replace the tool in exactly the same place, every time
- Low profile front Clamps allow a greater range of placement.Friction fit cut indicator doesn’t require tools to adjust or lock in place.Secure – 3 points of contact means your saw is held securely while cutting.Replaces Bora saw plate – 542006
BORA 5-Piece NGX Clamp Edge System Set For Making Precision Cuts, Includes 50-inch Clamp Edge, 50-inch Extension, Pro Saw Plate, Track Clamps, Non-Chip Strip, 544500
- Track Saw Precision: Making straight cuts with a circular saw, router, or jigsaw is a challenging task, but with the BORA 5-PC NGX Clamp Edge System it is quick and easy to break down sheet material and rip boards with clean, accurate cuts every time
- 100” of Cutting Capacity: The NGX 50” Clamp Edge is made of heavy-gauge, extruded aluminum that clamps tightly on everything from plywood to dimensional lumber. And for big projects, like a rip cut on a 4×8, increase the length up to 100 inches with the NGX 50” aluminum extension.
- Stop the Guesswork: Effortlessly attach the NGX Saw Plate to your right- or left-handed saw with the adjustable quick-release clamps. A fixed center molded channel helps reduce blade offset and the aluminum guide rails position your saw to make precision cuts.
- Reduce Tear Out: Prevent top edge tear-out and splintering with two rolls of 55-inch Self-Adhesive Non-Chip Strip. Attach it to the bottom of the NGX Clamp Edge for a smooth finish
BORA WTX Ruled Clamp Edge Saw Guide, 50 Inch Length Rail for Circular Saws, Cutting Track for Woodworking, Contractors, DIY, 545050
- Time Saver: The BORA WTX Ruled Clamp Edge Saw Guide makes it quick and easy to achieve straight, precise cuts when cutting plywood sheets or MDF with a circular saw, jigsaw, or router
- Fast Set-Up: Adjust the gripping clamp end to the desired length, lock it in place, and start cutting
- Long Cutting Length: This 50” guide rail is long enough for large and wide sheet material and can be used with all types of saws. Easily increase the length up to 100 inches by adding the BORA NGX 50-inch aluminum extension, sold separately.
- Ruled Straight Edge: The top edge of the clamp includes a ruler imprint with both metric and imperial measurements to guarantee your cuts are always the right size
- Extreme Durability: Made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use
BORA Rip Guide with Saw Plate + Rip Handle, BORA Cutting System Rip Guide for Circular Saws, 544008
- Precise Rip Cuts and Crosscuts: Get straight accurate rip cuts and crosscuts up to 24 inches (610mm) wide on the sheet material you are breaking down
- Repeatable Accuracy: The Bora Rip Guide allows you to make repetitive rip cuts and crosscuts, while improving your accuracy and saving you time
- Save Time: The Rip Guide by BORA will eliminate the need for marking and measuring each cut. Lock in your measurement and saw for accurate cuts every time. Now you can confidently make multiple cuts at once
- Easy Setup: Three simple steps and your Rip Guide is set up! The Saw Plate stop allows you to quickly setup your saw every time
- Stability: Large ergonomic Rip Guide handle ensures a solid grip. The aluminum rail attaches securely to the Saw Plate for confident cuts
- Use with Left- and Right-Hand Saws: Securely fit most left- and right-hand circular saws to the BORA Saw Plate and Rip Guide
As an Amazon Associate I earn from qualifying purchases.