Weller 170MN Xcelite General Purpose Shearcutter

Weller 170MN Xcelite General Purpose Shearcutter

    Features:

  • Flush cuts soft wire up to 20 AWG (0.8mm)
  • Blade angle is 20
  • Low profile, general-purpose cutter
  • Package dimensions:3.4″L x 0.8″W x 7.6″H

Xcelite 170M General Purpose Shearcutter, Diagonal, Flush Jaw, 5″ Length, 3/4″ Jaw length, Blue Grip

Xcelite 170M General Purpose Shearcutter, Diagonal, Flush Jaw, 5" Length, 3/4" Jaw length, Blue Grip

    Features:

  • Low profile
  • Superior blade by-pass shear cutting action
  • Greatly reduced mechanical shock delivered to the work
  • Features blue grips

Hakko-CHP-170 Micro Cutter – Red

Hakko-CHP-170 Micro Cutter - Red

    Features:

  • Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge (1.3mm) copper and soft wire
  • 21-degree
  • 2.5mm heat-treated carbon steel construction provides durability and long life
  • Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue
  • Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance

Hakko CHP Micro Cutter, Clean Cut, 16 AWG (set of 5)

Hakko CHP Micro Cutter, Clean Cut, 16 AWG (set of 5)

    Features:

  • Cut: flush
  • Max cut: 16 wag
  • Rockwell hardness (arch) 56
  • Ergonomic handle for comfort

Weller S2KN Xcelite Shearcutter and Pliers Set (2 Piece)

Weller S2KN Xcelite Shearcutter and Pliers Set (2 Piece)

    Features:

  • All-purpose Miniature electronic flush cutter and needle-nose Pliers
  • Includes models 170Mn & 378Mn
  • Advanced handle design
  • Highest quality carbon steel, Non-glare black finish, Lightweight construction
  • Xcelite by Weller S2K 2-Piece Shearcutter and Pliers Set

Xcelite 170D Shear Cutter with ESD-Safe Grips

Xcelite 170D Shear Cutter with ESD-Safe Grips

    Features:

  • Cuts soft copper wire up to 20 AWG
  • Capacity: 0.8 mm
  • Head Thickness: 1/2″
  • Head Width: 11/32″
  • Jaw Length: 3/4

Xcelite 175M General Purpose Shearcutter, Diagonal, Flush Jaw, 5″ Length, 3/4″ Jaw length, Red Grip

Xcelite 175M General Purpose Shearcutter, Diagonal, Flush Jaw, 5" Length, 3/4" Jaw length, Red Grip

    Features:

  • Low-profile diagonal shearcutter flush cuts soft wire up to 20 AWG (0.8 mm)
  • Safety clips reduce the risk of flying leads
  • Red grips are molded of wide shock-absorbing material for reduced operator fatigue
  • Complies with MIL-STD-2000, DODSTD-2000, and WS-6536E standards
  • 3/4″ jaw length and 5″ overall length

BOENFU Flush Cutter, Side Cutting Pliers, Internal Wire Spring,Zip Tie Cutter 5 Inches, Black – 2 Pack

BOENFU Flush Cutter, Side Cutting Pliers, Internal Wire Spring,Zip Tie Cutter 5 Inches, Black - 2 Pack

    Features:

  • SHARP AND STRONG Precision wire cutter suitable for copper and soft wire up to 16 AWG. Not for use on steel wire
  • EXCELLENT PRECISION Excellent for Ethernet cable preparation, electronics work, jewelry making and any hobby that requires a full flush cut
  • DURABLE & LONG LIFE Heat-treated carbon steel construction, Internal wire spring. Strong high quality rivet construction. Black oxide coated for rust prevention with minimal care
  • PVC HAND GRIPS Comfortable and non-slip, provide a comfortable and efficient cutting experience
  • 7*24 HOURS SERVICE Please feel free to contact us. If you are not satisfied with the product, we will give you a full refund. Shop all products are genuine, please rest assured to buy

Weller MS54VN Xcelite Semi-flush Oval Head Cutter, Green

Weller MS54VN Xcelite Semi-flush Oval Head Cutter, Green

    Features:

  • Diagonal cutting Pliers, semi-flush
  • General-purpose cutting
  • Oval head for long life
  • Features cushion grips
  • Xcelite by Weller MS54VN Semi-flush Oval Head Cutter, Diagonal, Flush Jaw, 4″ Length, 13/32″ Jaw length, Green Cushion Grip, Carded

Xcelite Ms54-5J Electronic Cutters, Straight Diagonal, Tapered Head, Flush

Xcelite Ms54-5J Electronic Cutters, Straight Diagonal, Tapered Head, Flush

    Features:

  • These Elite tools are investment cast and machined to close tolerances.
  • All tools come with RETURN coil spring in head and soft vinyl grip handles.
  • Cutters have flush cutting edges.
  • Features slim-line tapered head.
  • Cuts soft copper wire to . 025″.

As an Amazon Associate I earn from qualifying purchases.

Random products:

toy shelf for toddlers
ammoon karaoke mixers