Magpul Black XTM Forearm Panels

Magpul Black XTM Forearm Panels

    Features:

  • Low profile two piece design
  • Attach anywhere on a 1913 Picatinny rail without removing existing accessories
  • Easily removed but stays put even under demanding conditions
  • Can be mixed and matched with all 4 colors of XTM Panels

Larue Tactical IndexClips, 72 Piece Set (Camo Set)

Larue Tactical IndexClips, 72 Piece Set (Camo Set)

    Features:

  • 72 Piece Set
  • For MIL-STD-1913 Rails

Magpul Industries, M-LOK Rail Section, Fits M-LOK Hand Guard, 3 Slots, Black

Magpul Industries, M-LOK Rail Section, Fits M-LOK Hand Guard, 3 Slots, Black

    Features:

  • Designed for use with all M-LOK compatible hand guards and forends, our 3-slot M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc.
  • Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, our M-LOK Polymer Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges.
  • All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included.
  • 3 usable slots and a max overall length of 1.6″.
  • Made in the USA.

Lion Gears Tactical Extended Long Rail Cantilever Mount 0.5″ Riser with 25 Slots BM2505EX

Lion Gears Tactical Extended Long Rail Cantilever Mount 0.5" Riser with 25 Slots BM2505EX

    Features:

  • Extended Slim Low Profile Long Rail.
  • Low Profile 0.5″ high, 10″ long, 25 slots with 5 7/8″ overhang, 80mm Mounting Slots Spacing
  • Rock Solid Design with Steel to Steel Locking Screw & Nuts; Not Those Bolted into Aluminum Where Trouble Bounded to Happen Sooner or Later!
  • Lightweight Slim Design at 4oz

Solar Rail kit to Mount 6 Panels w/Clamps & L Brackets and with 7.3 Foot Rails

Solar Rail kit to Mount 6 Panels w/Clamps & L Brackets and with 7.3 Foot Rails

    Features:

  • This kit will mount 6 solar panels (40 inches wide) with a thickness of 1 3/8 inch to 1 15/16 inch.
  • 6- 7.3 feet Rails (88 Inches 2250mm length) and 8- Rail Splicers for 4 splicing points
  • 4- End Clamps and 10- Mid Clamps
  • 12- L brackets, Lag bolts and rubber washer and 6- Extra Bolts & Mounting Nut
  • 6- Grounding Lugs and 12- Stainless Steel Wire Clips Cable size 10 or 12

Mag Storage Solutions 5.56 .223 MagHolder Magazine Holder Storage Rack Magpul

Mag Storage Solutions 5.56 .223 MagHolder Magazine Holder Storage Rack Magpul

    Features:

  • Easily store and organize your AR-15 magazines
  • Mount in your gun safe, weapons room or ammo locker
  • Magazines snap in/out for secure protection against accidental damage
  • Be safe and responsible by organizing your mags in one location

ERGO 4766-BK Keymod Aluminum UMP Picatinny Rail, 5 Slot Extended, 2 Mount Holes, Black

ERGO 4766-BK Keymod Aluminum UMP Picatinny Rail, 5 Slot Extended, 2 Mount Holes, Black

    Features:

  • Description: 2 mounting holes
  • Finish color: black
  • Fits: Picatinny

Missouri Tactical Products LLC Picatinny Rail Hand Protection (Black)

Missouri Tactical Products LLC Picatinny Rail Hand Protection (Black)

    Features:

  • Fits onto standard MIL-STD-1913 PICATINNY rail
  • Protects shooter’s hand from heat, abrasion and they are Super Low Profile
  • Reduces or eliminates mirrage effect from barrel heat
  • Made from heat resistant (400 F) elastomer material for comfort and friction properties
  • These are Set of 3 and they are 6″ Long ***ULTRA LIGHTWEIGHT*** ONLY 0.5 oz each

2pcs Linear Rail Sliding Block, HGH15CA Rail Slider Block Guide Rail Slider Bearing Steel Rail Carriage

2pcs Linear Rail Sliding Block, HGH15CA Rail Slider Block Guide Rail Slider Bearing Steel Rail Carriage

    Features:

  • ◕‿◕ Material: Gcr15, Rated Static Load: 25.31Kn, Mxℓ:M4X5mm, Permissible Static Moment: 0.15kn·m.
  • ◕‿◕ Installation Step: Align The Guide Rail With The Slider. The Plastic False Rail Is Slowly Ejected Until The Slider Is Loaded Into The Guide Rail As a Whole, And The Plastic False Rail Falls Off Naturally.
  • ◕‿◕ High-Precision, Smoothness, High Wear Resistance, Low Noise, High Hardness, Long Service Life.
  • ◕‿◕ When Installing, Please Don’t Take Out The Plastic False Rail In The Slider Ahead Of Time, Otherwise The Steel Beads In The Slider Will Fall Out Easily And Can’t Be Used Normally When Assembling.
  • ◕‿◕ Due To The Different Display And Different Light, The Picture May Not Reflect The Actual Color Of The Item. Thanks For Your Understanding.

As an Amazon Associate I earn from qualifying purchases.

Random products:

kvf 300
rzilla