SmallRig Cage for Z CAM E2-S6/F6/F8 CVZ2423

SmallRig Cage for Z CAM E2-S6/F6/F8 CVZ2423

    Features:

  • 【Multiple Thread Holes】 multiple 1/4″-20 and ARRI-standard 3/8”-16 threads for accessories such as Side Handle 2093, Cold Shoe 2260, Top Handle 2165 and Monitor Mount 2348
  • 【Anti-twist】The cage secures to the camera via three 1/4”-20 screws, one on the top and two on the bottom to prevent twisting
  • 【NATO Rail】 Each side integrates with a NATO rail for Side Handle 2187 and 2270
  • 【Quick Install】Comes with slots for carry strap, built-in flat head screw driver and Allen wrench on the bottom for quick installation
  • 【ARRI-type Rosette】The right side comes with an ARRI-type rosette for rosette-handle. HDMI Cable Clamp & USB-C Cable Clamp are included in the package

SMALLRIG Cage for Z cam E2 Camera,Camera Cage with NATO Rail and Swiss Plate for Arca 2264

SMALLRIG Cage for Z cam E2 Camera,Camera Cage with NATO Rail and Swiss Plate for Arca 2264

    Features:

  • CVZ2264Built-in NATO Rail: SMALLRIG E2 Z Cam Cage 2264 Each side plate comes with a nato rail allows for mounting Magic Arm 2071 for monitor and Nato Handle 1955 to make your setup quick releasable
  • Multiple Threaded Holes: SMALLRIG E2 Cage 2264 Multiple 1/4”-20, 3/8”-16 and 3/8” threaded holes for arri for accessory attachment such as magic arm, cold shoe and handles
  • Built-in Swiss Plate for Arca: The bottom plate features rubber cushions on the top to prevent the cage from scratching the camera and integrates with a plate for Arca Swiss allows to mount your Z cam E2 camera to the tripod for Arca directly in seconds
  • Lightweight Design: The purpose of the cage is to make your setup lightweight so that you can use the side plate or bottom plate separately based on your needs
  • Compatibility:Design for Z cam E2 Camera

Tiltaing Full Camera Cage for Z CAM (Compatible with Z CAM E2, E2C, and E2G Cameras) (Tilta Gray)

Tiltaing Full Camera Cage for Z CAM (Compatible with Z CAM E2, E2C, and E2G Cameras) (Tilta Gray)

    Features:

  • Protective armor compatible with the Z CAM E2, E2C, and E2G camera bodies
  • Integrated cold shoe mount for top handle or microphone accessories.
  • Rosette mounts for additional rosette attachments such as the Tilta Type II side handles for easier grip and control.
  • Numerous 1/4-20″ screw holes along the cage for additional pro video gear accessories.
  • Baseplate compatible with ARCA and Manfrotto plates for tripod setups.

Poyinco Z Cam E2 Camera Cage with 1/4” and 3/8” Thread Locating Holes for Handle&Lights

Poyinco Z Cam E2 Camera Cage with 1/4” and 3/8” Thread Locating Holes for Handle&Lights

    Features:

  • Poyinco the Manufacturer: Stop paying more nonsense dollars for camera cage from other brands. Poyinco’s camera cage has the same quality (even better) but less price. We also provide lifetime warranty for ervery Poyinco branded product. Just buy with confidence.
  • TOP PLATE:Cold shoe mount for mounting top handle, microphone, SSD etc. 1/4 , 3/8 screw mounting points, Arri extension point.
  • LEFT & RIGHT ARMOR:Arri standard rosetle for installing side handle. 1/4 , 3/8 screw mounting points, Arri extension point.
  • Material: High-grade aluminum alloy. Baseplate is compatible with quick release plate, Manfrotto plate and Arca quick release plate, Allowing fast switch between mounting on tripod, shoulder rig and gimbal. Manfrotto plate and Arca quick release plate are optional accessories which need to be purchased separately.
  • Compatible with a wide range of hard disc holders, Such as T5, WISE etc, Giving you more choices to achieve longer recording time and larger data storage capacity.

SMALLRIG NATO Handle Wooden Handgrip for BMPCC 4K & 6K and Z-CAM E2, Compatible with Samsung T5 SSD – HSN2270

SMALLRIG NATO Handle Wooden Handgrip for BMPCC 4K & 6K and Z-CAM E2, Compatible with Samsung T5 SSD – HSN2270

    Features:

  • 【HIGH CUSTOMIZATION】The NATO handle is exclusively designed for SMALLRIG BMPCC 4K & 6K cage for Blackmagic Design Pocket Cinema Camera 4k & 6K, such as SMALLRIG Cage 2203, 2254 and 2255, also compatible with Z-CAM E2 Cage 2264
  • 【UNIVERSAL&QUICK RELEASE】The handgrip can be used on both left and right sides. Besides, it features a NATO clamp that allows you to attach directly to the left NATO rail on SMALLRIG Cage 2203, 2254 and 2255, making installation conveniently
  • 【SSD CARD SLOT】Comes with an SSD card slot inside for Samsung T5 SSD, and the anti-off lock on the bottom could prevent accidental dropping of the SSD card. It protects your SSD card from outside scratching and makes your data transmission safer
  • 【MOUNTING OPTIONS】Features a bunch of 1/4’’-20 and 3/8’’-16 threaded holes on the top where accessories like Monitor Mount 1842, Articulating Arm 2070 can be mounted onto it
  • 【ERGONOMICAL DESIGN】The handle fits into the hand ergonomically and it’s comfortable to handheld, providing a comfortable experience for your handheld shooting

HEDBOX UNIX-0B – V-Mount Battery Adapter Plate, 3x D-Tap & USB, for Z-CAM E2-S6, E2-F6, E2-F8, E2-M4, E2C and TERADEK

HEDBOX UNIX-0B - V-Mount Battery Adapter Plate, 3x D-Tap & USB, for Z-CAM E2-S6, E2-F6, E2-F8, E2-M4, E2C and TERADEK

    Features:

  • QUALITY: High Quality Aluminium V-lock release (10.000 times locks warranty)
  • OUTPUTS: Build-in 3x D-Tap DC 14.8V/148W and 1x USB 5V/2.1A Power Out Socket
  • CONSTRUCTION: Cine Pro Construction & Rough Design with Multiple Mounting holes (4 x M3x12 screws provided) Metal Back Frame Support for stability on Camera mounting
  • BREAKAWAY CABLE: 45cm lenght DC 14.8V/100W cable, with 2-pin Push Pull FGG.0B.302 Male Connector
  • USE WITH: Z-CAM E2-S6, E2-F6, E2-F8, E2-M4, E2C and TERADEK CUBE 775, 725, 705, 675, 655, 625, 605, 505, DidiU, Bolt 4K LT 750, 500 Sidekick XT, MDR.ACI , SERV PRO, LINK PRO, ORBIT PTZ W Receiver

PortKeys BM5 II Camera Control Monitor High Brightness Touch Screen Monitor with LUT(5.2 Inch)

PortKeys BM5 II Camera Control Monitor High Brightness Touch Screen Monitor with LUT(5.2 Inch)

    Features:

  • 【Important】BM5 II could control a lot of cameras,if you want to control your cameras, you need to purchase Portkeys control cable suitable for the camera separately.To control BMPCC 4K&6K,you need to add bluetooth module BT1
  • 【High Performance】2200 Nit Touch screen monitor with aluminum frame;1920×1080 resolution;3G-SDI/HDMI signal supports.It allows you to make better videos
  • 【Tilta Nucleus N/M Follow Focus】Wired connect to motor out on BT1 for control. Including CAL、A/B Point、Follow Focus. Power supply to Tilta Nucleus Follow Focus system
  • 【Charging Method】Sony NP-F970/F960/F750/F550,or you could use PortKeys 12V-2A Power Adaptor with Aviation Connector to power camera monitor
  • 【Attention】one year warranty, Please check the product description before buying to see if it is suitable for your camera.The metal casing of this camera monitor has good thermal conductivity. Be sure to adjust the fan to the maximum under the highest brightness

Tiltaing Camera cage Kit A Compatible with Z CAM (Tilta Gray)

Tiltaing Camera cage Kit A Compatible with Z CAM (Tilta Gray)

    Features:

  • Protective armor for the Z CAM E2, E2C, E2G, E2-S6, E2-F6, E2-F8 camera bodies
  • Add several mounting points for pro video accessories
  • Stylish Tiltaing design and construction, Made of Aluminum Alloy and Stainless Steel
  • Includes: (1) Tiltaing Full Camera Cage for Z CAM – Tilta Gray (1) HDMI Clamp Attachment for Z CAM – Tilta Gray (1) Tiltaing Quick Release Top Handle – Tilta Gray (1) Tiltaing SSD Drive Holder for T5 (1) 90 Degree USB-C Cable for Z CAM (20cm) (1) Tiltaing ARCA quick release plate – Tilta Gray (1) Tiltaing Manfrotto quick release plate

CAME-TV Z CAM E2 Cage Plus 2X Wooden Handles

CAME-TV Z CAM E2 Cage Plus 2X Wooden Handles

    Features:

  • 2x Came-TV Z CAM E2 Cage Plus Wooden Handles – Came-TV 1 Year Warranty
  • Compatibility: Z CAM E2 4K Cinematic Camera
  • Material: CNC Machined Aluminum

HEDBOX UNIX-0BL – V-Mount Battery Adapter Plate, 3x D-Tap & USB, for Z-CAM E2-S6, E2-F6, E2-F8, E2-M4, E2Cand TERADEK

HEDBOX UNIX-0BL - V-Mount Battery Adapter Plate, 3x D-Tap & USB, for Z-CAM E2-S6, E2-F6, E2-F8, E2-M4, E2Cand TERADEK

    Features:

  • QUALITY: High Quality Aluminium V-lock release (10.000 times locks warranty)
  • OUTPUTS: Build-in 3x D-Tap DC 14.8V/148W and 1x USB 5V/2.1A Power Out Socket
  • CONSTRUCTION: Cine Pro Construction & Rough Design with Multiple Mounting holes (4 x M3x12 screws provided) Metal Back Frame Support for stability on Camera mounting
  • BREAKAWAY CABLE: 45cm lenght DC 14.8V/100W cable, with 2-pin Push Pull FGG.0B.302 Male Right Angle
  • USE WITH: Z-CAM E2-S6, E2-F6, E2-F8, E2-M4, E2C and TERADEK CUBE 775, 725, 705, 675, 655, 625, 605, 505, DidiU, Bolt 4K LT 750, 500 Sidekick XT, MDR.ACI , SERV PRO, LINK PRO, ORBIT PTZ W Receiver

As an Amazon Associate I earn from qualifying purchases.

Random products:

ls bl cream
ls coil packs