Zcen ZCEN CV Joint Ear Clamp Banding Tool & Boot Crimp Pliers 2pcs Car Banding Tools Kit

Zcen ZCEN CV Joint Ear Clamp Banding Tool & Boot Crimp Pliers 2pcs Car Banding Tools Kit

    Features:

  • Pliers constructed from pressed steel with black-coated finish. With non-slip rubber handle, can effectively reduce user fatigue.
  • With the help of the built-in cutter and winding mechanism, the strapping can be tightened and cut quickly and effectively.
  • This CV joint plier is easy to use, which is essential to crimp and flatten clamps on ear type CV joint boot clamps.
  • This kind of CV joint clamp is practical and suitable for ear hose clamps on fuel, cooling system and vacuum hoses.
  • CV joint clamp tool includes a 4.25 inch (10.8cm) long plastic handle and 1 inch (2.5cm) long rubber grips on side levers. Pliers includes 5.75 inch (14.6cm) long formed rubber handles.

Zcen ZCEN Bubble Flaring Tool Kit for Automotive Brake Line

Zcen ZCEN Bubble Flaring Tool Kit for Automotive Brake Line

    Features:

  • Lever-lock flaring bar and detailed instruction make the tool set easy to use both for professional and DIY mechanics.
  • Blow molded hard plastic storage case keeps tools contained and organized, provides a convenient handle for easy transportation and portability.
  • flaring cone x 1, flare bar x 1, gauge/wrench x 1, adapters/dies x 4, manual x 1, storage case x 1.
  • 4.75mm, 6mm, 8mm,10mm (3/16”, 1/4”, 5/16”, 3/8″ )tubings for brass and copper pipes/tube.
  • Designed for metric crack-free bubble or “ISO” flares in your auto brake line systems commonly. Heat-treated steel material for maximum strength and longevity that resists corrosion.

ZCEN Hose Clamp Pliers for Fuel Hoses, Plastic Hose Clamp Tool Kit Brake

ZCEN Hose Clamp Pliers for Fuel Hoses, Plastic Hose Clamp Tool Kit Brake

    Features:

  • The hose clamp tool is made of high-quality ABS plastic, insulated and non-conductive, ensuring safety.
  • The clamp set uses an ergonomically designed handle, which is comfortable to hold and easy to use.
  • A set of 3pcs hose clamp pliers perfect for the use during repair of vehicle cooling, brake and fuel systems.
  • Essential tools for use on flexible hose, fuel lines of brakes, heaters and radiators.
  • Hose clamps are not suitable for rigid, reinforced or high-pressure pipelines.

Zcen Car Disc Brake Piston Spreader, Wind Back Brake Pad Replacement Tool

Zcen Car Disc Brake Piston Spreader, Wind Back Brake Pad Replacement Tool

    Features:

  • This tool is made of 45 steel and has a long service life. In addition, it has high hardness and is not easy to deform.
  • Used to reset the brake piston when changing the brake pad.
  • To be operated with T-handle or external hexagon 19.
  • Simple operation, suitable for most disc brake calipers installed on right-hand threaded cars.
  • Suitable for most European and Japanese cars with right-hand threads.

Zcen 1/2 Inch Torque Wrench Angle Gauge Tool Adjustable Torque Meter Wrench Set

Zcen 1/2 Inch Torque Wrench Angle Gauge Tool Adjustable Torque Meter Wrench Set

    Features:

  • 360 Degree angle scale in 2 degree increments.
  • Adjustable arm has 2 different lengths for flexibility of use.
  • Clear, eye-catching lines are easy to identify and ensure correct tightening.
  • Easy to zero through the turning tool housing for future use.
  • Steel with a chrome finish will allow this workshop tool to be a part of the toughest jobs.

Zcen Hose Clamp Pinch Off Pliers for Fuel Hoses, Gas Lines Brake Hoses

Zcen Hose Clamp Pinch Off Pliers for Fuel Hoses, Gas Lines Brake Hoses

    Features:

  • These flexible pinch off pliers can lock into position leaving your hands free to repair.
  • These tools are ideal to use as coolant hose clamp pliers, fuel line clamps, brake line clamp, and even as fuel line clamp pliers.
  • These hose pinch pliers kit are durable, light weight, non-conductive and rust-proof.
  • The large pliers measure approximately 9.93 x 2.12 x 0.75 inches, the medium pliers measure 7.18 x 1.87 x 0.75 inches, the small pliers measure 6.12 x 1.62 x 0.62 inches.
  • You will receive a total fo 3 hose pinch off pliers in 3 different sizes.

Zcen ZCEN Disc Brake Pad Installation Spreader Caliper Piston Press Steel Spreader Tool Kit

Zcen ZCEN Disc Brake Pad Installation Spreader Caliper Piston Press Steel Spreader Tool Kit

    Features:

  • Constructed from top quality steel, high strength, thicken touched surface, sturdy and durable for long time use.
  • It is quick and easy to use disc brake spreader, when separate pistons in their calipers using it.
  • Normally operated with the supplied T-bar but can also be used with a 1/2″ ratchet.
  • An essential tool for retracting the brake piston to allow fitment of new brake pads. Suitable for use on most cars. Can be used on single piston sliding callipers, twin opposing piston callipers etc.
  • Chemically blackened steel spreader plates. (2″x2-1/4″) Each plates, Max Spread 3-1/4″.

Zcen Inner Tie Rod Removal Tool, 3/8” Inch Low Profile Tool for Removal Installation

Zcen Inner Tie Rod Removal Tool, 3/8

    Features:

  • Designed to remove inner tie rods without having to extract outer tie rods. Turns smooth tie rods easily, which is the best tool for easy removal, maintenance and installation of tie rods.
  • Slide the tool over the end and tighten the collar for operation with the 3/8” drive extension; the adapter can be used for larger breaker rods/extensions.
  • Fits for all standard tie rods with smooth cylinder ends; Work on any rod that fits between the 3″ top and bottom components with both 9/16″ nuts screwed on and tightened.
  • When you insert the socket wrench or breaker lever and turn it as needed, the tool teeth can firmly grasp the lever.
  • Compact/low profile design means no bulky tool to store; Inexpensive and effective way to turn smooth tie rod ends.

Zcen ZCEN Vacuum Hose and Fuel Line Removal Tool Separator Pliers Pipe Repairing Tool

Zcen ZCEN Vacuum Hose and Fuel Line Removal Tool Separator Pliers Pipe Repairing Tool

    Features:

  • For easy removal of 5/32″ to 1/2″ vacuum and fuel hoses. It is a faster and more effective removal method than other traditional options.
  • Simply place the black jaw on the fitting or tubing – the jaw will grip the material.
  • Use the silver jaw to push the vacuum hose or fuel line off the fitting or tube.
  • Contoured handles allow for comfortable, fatigue free use.
  • Compatible with various difficult dismantling pipes, such as air pipes, power auxiliary pipes, cooling oil pipes, water pipes, etc.

Zcen 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

Zcen 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

    Features:

  • Spurtar Brake Caliper Compression Tool is ideal for automotive brake pump adjustment.
  • Works on single piston, dual piston and quad piston, as well as single and twin piston floating calipers.
  • Automotive brake caliper centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • Ratchet technology of this Brake Caliper Tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • This caliper piston tool extended reversing lever allows for easy change from spreading to retracting. Cushioned grip handle provides comfortable and easy grip.

As an Amazon Associate I earn from qualifying purchases.

Random products:

magellan outdoors tent
magellan handheld gps